Bus Seat Belts

Click Here to see installation instructions! View Colors Safety tested and approved, sewn, assembled, packaged in the USA.
These easy to install bus seat belts are Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 Approved push button lap belts. Meets Society of Automotive Engineers (SAE) J386 specs. You can choose from 6 different belt lengths. that can adjust to a maximum of 48 60, 74, 90 110 or 140 inches. These seatbelts are non-retractable lap belts only (no shoulder harness).

Push button lap seat belt now also 48" or 140"

The female push-button end length for each measures:
60" belt female buckle side: 23 inches
74" belt female buckle side: 32 inches
90" belt female buckle side: 42 inches
110" belt female buckle side: 36 inches
140" belt female buckle side: 46 inches
48" belt female buckle side: 20 inches

They are universal fit so they will work perfectly on any bus or shuttle bus. Each optional 212 hardware kit includes all the hardware that you need for 1 person, for one seat. --The orange colored belts have black buckle ends. With Black, Navy, Grey, Tan, Maroon and Red colors, the plastic portion of the belt buckle color matches the color of the webbing (belt).

Click HereCompare the Short Housing to the Long Housing To compare the long and short housing styles and View dimensions.
These are 2 point retractable push button seatbelts, lap belt with buckle only (no shoulder harness). These are universal fit, so they are perfect for most any bus. They extend out of the retractor 53" and of course are Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 Approved and meets Society of Automotive Engineers (SAE) J386 specs! Sewn, assembled, packaged, safety tested and approved in the USA. You can choose for either a bucket or bench type seat application. This is our Short Housing restraint, meaning that it is best used with a low seat configuration. With higher seat applications, choose our Long Housing seatbelt below. View the optional hardware kit that you can add to your order below Click Here. Click to view our SeatBelt Hardware Page. Click to view our Retractable Safety Bus Seat Belts Installation Instructions! Click Here to View Color Chart

8" Long Housing Retractable Bus Seat Belts

Click HereCompare the Short Housing seatbelt to the Long Housing To compare the long and short housing seat belts and View dimensions. Best used with a normal to high seat application. This is a 2 point retractable lap belt with buckle only (no shoulder harness). These are universal fit, so they are perfect for most any bus or shuttle. You can choose for either bench or bucket seat applications. They extend to 53" out of retractor and of course these seat belts are Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 Approved and meets Society of Automotive Engineers (SAE) J386 specifications! To see the optional hardware kit that you can add to your order below Click Here. Click to view our Belt Hardware Page. Safety tested and approved, assembled, sewn and packaged in the U.S.A. Click to view our Retractable Safety Bus SeatBelts Installation Guide! Click Here to see 30 Colors Chart.

3 Point Retractable Bus Seat Belts with Long Sash Guide

.This is a special 3-point (both lap belt and shoulder restraint) retractable seat belt with a long sash guide for the bus application where the shoulder sash guide anchor attachment is higher than a normal passenger car configuration. This belt has a longer sash guide to lower the shoulder strap so that it aligns properly with the occupant's neck and shoulder. Click Here to view Long Sash Photo. This restraint extends to 125" out of retractor box. It is universal fit, so it is perfect for most any bus. "So, how do I figure out what seat belt length will work?" Right here! How to Measure for 3 Point Seat Belt Installation
Optional hardware kit includes Angle Bracket, #212 Bolt Kit Mounting Hardware, Shoulder Bolt & Mounting Plate Click Here or check out our Seat Belt Hardware Page. Choose Bench or Bucket Seat Application. And of course they are Federal #209 and #302 approved and meets Society of Automotive Engineers (SAE) J386 specs. Approved and safety tested, sewn, assembled, packaged in the USA!

Click Here for Long Sash 3 Point Belt Installation Instructions!

IMPORTANT NOTE: Some colors of seat belts have a different "C" end than shown above Click to View Installation Instructions for these seatbelts. View Color Chart

Retractable Bus 3 Point SeatBelt

This is a 3 point belt (both lap and across the shoulder). It extends to 125" out of retractor box. It is universal fit, so it is perfect for most any bus or shuttle where a high shoulder sash anchor point is not used. "So, how do I figure out what seat belt length will work?" Right here! How to Measure for 3 Point Seat Belt Installation
Optional hardware kit includes Angle Bracket, #212 Bolt Kit Mounting Hardware, Shoulder Bolt & Mounting Plate Click to View also see our Seat Belt Hardware Page. Choose Bench or Bucket Seat Application. Safety tested and approved, sewn, assembled, packaged in the USA. And of course they are Federally #209 and #302 approved and meets Society of Automotive Engineers (SAE) J386 specs!

Click Here for Installation Instructions for a 3 Point Retractable Belt. See 30 Colors