Micro-Switch 3 Point Forklift Seatbelt Retractable - Both Circuit Closed & Open

This is a retractable 3-point lap and shoulder belt forklift seat belt.

Your choice of either 6 inch, 9 inch or 12 inch long buckle end. Click to See!

These 2" wide belts are retractable and have a 3-wire micro-switch that makes sure that your forklift driver buckles up before driving the lift truck.

Each forklift seat belt is BOTH "Circuit Open" and "Circuit Closed".

Circuit Open: means that the seat belt must be buckled up before the motor will start, preventing drivers from moving the vehicle until they are buckled up.
Or
Circuit Closed: means that if the seat belt is not buckled when the motor is started, then a bell/buzzer can sound alerting that the driver isn't buckled up.

Wiring Diagram and Instructions show you how to easily wire the belt for either open or closed!

These forklift seat belts work with 12V & 24V Systems.

Available in the colors Black and Orange. Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 Approved.

Webbing (belt) Extends 125 inches out of the retractor unit. Add the length of the female buckle end for the Total length from mounting hole to mounting hole. "Hey Wesco, how do I figure out what seat belt length will work?" No Problem, right here! How to Measure for 3 Point Seat Belt Installation

Equipped with ELR Retractor What's That?

(Optional mounting hardware kit) Click to View.